Revision: 19/07/2005 Page 1 of 1
Base Mixture of terpenes
Consistency thixotropic gel
density 0875 g/mL
viscosity 1400 ± 600 Poise
solubility in water soluble
solubility in soluble in hydrocarbons
Sealant Remover is a ready made gel for the easy removal of cured silicones and MS-polymers.
– Liquid easy application
– Suitable for silicone and MS-polymer sealants
Removal of cured silicone and MS-polymer sealants from all sorts of substrates.
Packaging: tin 400mL
12 months in unopened packaging in a cool and dry storage place at temperatures between +5°C and +25°.
Type: all non porous surfaces (not on nylon and PMMA)
We recommend a preliminary compatibility test.
Application method: The substrates should be dry before applying the Sealant Remover. Do not apply when rain is imminent.
Cut away as much as possible from the old sealant with a sharp knife apply the Sealant Remover on the remains and leave it there for at least 10 minutes. Remove the remains then with a spatula or cloth and check whether all stains have gone. If not repeat the whole process.
Application temperature: +5 to +35°C
Cleaning: white spirit
Health- and Safety Recommendation:
Apply the usual industrial hygiene. Wear gloves and goggles.
Apply only in a ventilated area.
In case of contact with skin wash with water and soap.
Sealant Remover can produce stains on natural stones.
Test the compatibility of this product with all types of plastics on a non-visible
There are no reviews yet.