Revision: 13/07/2006
Technical Data:
Base Water soluble solvents
Consistency Gel
Density Approx. 154 +/- 005 g/cm³
Solubility in water Soluble
pH 10% in water Approx. 105
Product:
PU Remover is a ready to use gel for the easy removal of all remains of cured PU Foam.
Characteristics:
– Very active
– Odourless
– Free of (aromatic) hydrocarbons
– Easily biodegradable
– Economic and easy to apply
Applications:
PU Remover easily removes all cured PU Foam residues on non porous surfaces such as plastics metals PVC etc.
Packaging:
Colour: tan
Packaging: 100 ml
Shelf life:
18 months in unopened original packaging in a cool and dry storage place at temperatures between +5°C and +25°.
Surfaces:
Type: all non porous surfaces. Do not use PU Remover on untreated copper brass zinc acrylic paint or PMMA (Plexiglass). Risk of staining on porous surfaces.
We recommend a preliminary compatibility test on an invisible part of the substrate.
Applying the remover:
Application method: Remove mechanically or cut away carefully as much cured foam as possible. Apply PU Remover by means of the enclosed brush onto the cured PU foam. Leave PU Remover for at least 30 minutes and maximum 2 hours. Remove dissolved foam with the enclosed spatula and wipe off with a dry cloth. If necessary repeat treatment by reapplying PU remover.
Application temperature: +5 to +35°C Cleaning: damp cloth
Health- and Safety Recommendation:
Apply the usual industrial hygiene. Wear gloves and goggles.
Apply only in a ventilated area.
In case of contact with skin wash with water and soap.
Remarks:
Always stick to recommended working time to avoid damage of the surface
PU Remover may cause staining on porous surfaces (such as natural stone)
Reviews
There are no reviews yet.