Technical Data Sheet
SOUDAFLEX 40 FC
Revision: 17/04/2009
Remark: The directives contained in this documentation are the result of our experiments and of our experience and have been submitted in good faith.
Because of the diversity of the materials and substrates and the great number of possible applications which are out of our control we cannot accept any
responsability for the results obtained. In every case it is recommended to carry out preliminary experiments.
Technical Data:
Base Polyurethane
Consistency Paste
Curing System Moisture Cure
Skin formation (20°C/65% R.H.) Ca. 15 min.
Curing Rate (20°C/65% R.H.) 3 mm/24h
Hardness (DIN 53505) 40 ± 5 Shore A
Specific Gravity (DIN 53479) 130 g/ml
Temperature Resistance -30°C to +90°C
Elastical Recovery (ISO 7389) > 80 %
Maximum allowed Distortion 20 %
Elasticity Modulus 100% (DIN 53504) 080 N/mm²
Maximum Tension (DIN 53504) 170 N/mm²
Elongation at Break (DIN 53504) 700 %
Product:
Soudaflex 40 FC is a high quality one component
polyurethane sealant with high modulus for a wide
range of sealing and bonding applications
Characteristics:
· Very easy application
· Stays elastic after curing
· Very good adhesion on many materials
· Excellent resistance to many chemicals
· Especially developed for concrete applications
Applications:
· All sealing and bonding applications in the
building industry
· Structural bondings in vibrating constructions
Packaging:
Colour: white grey black other colours on request
Packaging: alu cartridge 310 ml sausages 600 ml
Shelflife:
12 months in unopened packaging in a cool and dry
storage place at temperatures between +5°C and
+25°
Surfaces:
Type: all usual building surfaces most metals
polyesters and many plastics not on glass.
State of Surface: clean dry free of dust and grease
Preparation:
· In very warm and moist climates we
recommend the use of Primer 100 for
applications on porous surfaces
· No primer required for non porous surfaces.
· Non porous surfaces may be activated by
Surface Activator
We recommend a preliminary compatibility test.
Joint Size:
Minimum Width: 2mm (in bonding applications)
5mm (in joints)
Maximum Width: 10mm (in bonding applications)
30mm (in joints)
Minimum Depth: 5mm (in joints)
Recommandation:
· Joints of 12mm or less : depth = width
· Joints of more than 12mm : 2 x depth = width
Technical Data Sheet
SOUDAFLEX 40 FC
Revision: 17/04/2009
Remark: The directives contained in this documentation are the result of our experiments and of our experience and have been submitted in good faith.
Because of the diversity of the materials and substrates and the great number of possible applications which are out of our control we cannot accept any
responsability for the results obtained. In every case it is recommended to carry out preliminary experiments.
Application:
Method: caulking gun
Application temperature: +5°C to +35°C
Clean: with white spirit immediately after use
Finishing: with a soapy solution before skinning
Repair: with same product
Health- and Safety Recommendation:
Apply the usual industrial hygiene.
Remarks:
– In order to ensure the correct performance of
our product Soudal recommends a small
adhesion test.
– When painted with oxidative drying paints
disturbances in the drying of the paints may
occur
Tests and certificates:
ISO 11600 F 20 HM
AENOR Certificate N°047/000278
Reviews
There are no reviews yet.