A solvent based bitumen modified primer designed to seal and prepare the substrate prior to the installation of ARDEX SBS (Shelterseal) Self Adhesive Membranes.
Black liquid with strong solvent odour.
Surface Preparation: Ensure that the surface to be primed
is dry and free from dust oil paint curing membranes
form release agents and all other contaminants.
Stir contents well before use.
Apply by brush or roller working the primer into the
Primer must be dry before applying membrane.
One (1) litre of ARDEX WPM 249 (Shelterseal) Primer will
cover approximately 5m2.
Approximately 20-30 minutes @ 23°C.
Wash equipment with ARDEX WPM 290 (WA) solvent.
12 Months in original unopened packaging stored at 23?C.
Primer should be used with appropriate mask and
breathing apparatus in areas of poor ventilation and/or
ARDEX WPM 249 is hazardous and a dangerous goods. It
is highly flammable and irritating to the eyes and skin. No
smoking. Harmful if swallowed. Keep away from sources
of ignition. Keep container in a well ventilated place.
ARDEX WPM 249 is highly flammable. Severe fire hazard
when exposed to heat and/or oxidisers. Vapour may travel
a considerable distance to source of ignition. Heating may
cause expansion or decomposition leading to violent
rupture of containers.
It is essential to ensure ARDEX WPM 249 Primer has fully
dried before the Ardex Torch Applied Bitumen membranes
ADDITIONAL INFORMATION IS LISTED IN THE MATERIAL
SAFETY DATA SHEET.
ARDEX PRESSURE SEAL
Designed to seal the edges of ARDEX Butynol or ARDEX
Torch Applied Bitumen (Shelterbit) Membranes and ARDEX
SBS Self Adhesive (Shelterseal) Membranes where no
existing cavity flashing or dampcourse has been installed.
3 metre lengths of specially formed aluminium strip.
The ARDEX Pressure Seal is mechanically fixed through
the top edge of the membrane at 500mm intervals.
The uppermost edge of the strip is then sealed with
ARDEX Butynol Sealant along the profile provided.
Packs containing 10 x 3 metre lengths.
ARDEX PROTECTION BOARD
Membrane Termination Seal
ARDEX Protection Board is a fluted polyethylene board
designed to be used after the membrane installation
and prior to backfilling to protect the membrane from
mechanical damage during the backfilling operation.
1800 X 1200mm fluted boards.
Packs of 25 boards.